Is Dyno Test Performed on 4x4 Vehicles?
The dyno test applied to most vehicle models is performed through a computer-assisted mechanism. Thanks to the test, how high the engine can perform, how much power the chassis can transmit, whether there is any delay and the health of these parts are measured. It will be very useful for you to bring the vehicle to professional companies such as Corporate Auto Expertise and have this test applied, especially in the purchase and sale of second-hand vehicles. Although the vehicle looks healthy from the outside, it may be in a very worn condition. The odometer of the vehicle may have been tampered with. This test reveals the true power and health of the vehicle.
After the vehicle descends from the test mechanism, a detailed report is issued. Accordingly, if there are parts that need to be replaced, the list of these is sent to the customer. This mechanism also controls how high the vehicle can accelerate and whether it has problems such as sliding left and right. These reports provided by expert companies also reveal how reliable the vehicle is. For this reason, you need to choose the place where you have your vehicle tested carefully.
Before the dyno test to be applied to the vehicle in experienced companies such as Pilot Garage, the device is prepared according to whether the vehicle is front wheel drive, rear wheel drive or 4x4. Then the vehicle is placed on the rollers on which it will move steadily. These rollers are just like the treadmill. They allow the vehicle to accelerate without moving from its location. Of course, the vehicle is fixed on this system with straps against possible accidents. Again, in order to simulate the performance of the vehicle on the road, a device that creates an air flow is placed in the front part.
Then the tool is started and the test starts. The vehicle is accelerated to its highest speed. Gear shifts are made. If the vehicle has a turbo, it is also checked whether it is activated during this test and when it starts to work and when it is cut off. This completes the dyno test. In the report prepared after the test;
- Horse power
- Torque values
- how much resistance the motor withstands
- What condition are the transmission parts in?
- Whether there is a power loss
- Condition of shock absorbers
- General condition of the vehicle
- Performance losses
Detailed information about it will be learned. In this way, you can access many different information about your vehicle. At this stage, you should make sure that the place you choose for the dyno test has an expert staff in the field. In addition, you have to make sure that the place you choose is fully equipped.
Checking the performance of the engine while the vehicle is on the dyno test setup is called the dyno engine performance test. During this test, the vehicle is taken up to the highest possible speed. The vehicle is then held constant at different speeds. At these speed values, the performance of the vehicle is evaluated separately. Data such as whether there is a delay in transmission, how torque and performance values are affected, are taken and converted into a report by experts at Pilot Garage Auto Expertise. While preparing this report, the factory values of the vehicle are taken as basis.
Thus, it is revealed whether the vehicle is underpowered or not.
If you work with professional companies, your vehicle will be evaluated meticulously and it will be revealed how healthy its engine is. In general, even if the vehicle is old, a vehicle whose engine has been regularly serviced will not perform very poorly during tests. But an engine that has been heavily used and not properly maintained will perform poorly and will show you that it will cause problems in the future. For this reason, it is absolutely necessary to have this test done while trading.